Home Silicon Wafers Si Epi Wafers Si Ingots SiC Wafers SOI Wafers SoS Wafers
III-V Materials Germanium Sapphire Quartz Solar Materials Misc. Materials Order Form
                   
 Material   Type   Dopant   Orientation   Diameter   Thickness   Surface   Resistivity   Nc 
- -
Updated: Mar 28 2024
Shopping Cart
Compound Semiconductors

GaAs - Gallium Arsenide, GaP - Gallium Phosphide, GaSb - Gallium Antimonide, InAs - Indium Arsenide, InP - Indium Phosphide
GaAs - Gallium Arsenide
Note: Surface - P = Polished, E = Etched, C = AsCut, G = Ground, Ox = Oxide (on that surface)
Add to
Cart
Item Qty in
Stock
Price
$/wafer
Material Orient. Diam. Thck
(μm)
Surf. Source Resistivity
Ωcm
Nc
a/cm3
Mobil
cm2/Vs
EPD
/cm2
Comment
H426 1 $150.00 undoped SI GaAs:- [100] 6" 525 BROKEN Reclam n-type       25 Broken GaAs wafers, shattered in many pieces
11654 16 $244.00 undoped SI GaAs:- [100] 6" 625 P/P Reclam n-type       SEMI Notch; Epi Ready
11734 75 $364.00 undoped SI GaAs:- [100] 3" 550 ±50 P/P NCIT due 4/08 n-type >1E7   >5,000 <10,000 US Flats; Epi Ready
11730 5 $575.20 undoped SI GaAs:- [100] 3" 625 P/P ITME due 5/27 n-type 2.5E7-1.7E8 (7-50)E6 5,000-5,200 <1.5E5 EJ Flats; Epi Ready
A1730 5 $575.20 undoped SI GaAs:- [100] 3" 625 P/P ITME due 5/27 n-type 6.5E7-1.1E8 (1-1.8)E7 5,300-5,700 <1.5E5 EJ Flats; Epi Ready
10629 2 $170.00 undoped SI GaAs:- [100] 2" 341 ±15 P/E CMK n-type >1E7       1 Flat; Epi Ready
10538 2 $140.00 undoped SI GaAs:- [100] 2" 350 P/E CMK n-type >1E7       1 Flat; Epi Ready
6156 1 $195.00 undoped SI GaAs:- [100] 2" 110 ±15 P/P Xiamen n-type >1E7     <3,200 VGF; EJ Flats; Epi Ready
10161 1 $850.00 undoped SI GaAs:- [100] 2" 6,700 ±50 P/P ITME n-type 1.1E8 1.1E7 5,000 <1E5 NO Flats; Epi Ready
S761 8 $246.00 undoped SI GaAs:- [100] 1" 350 P/P CMK n-type >1E7     <8,000 VGF; NO Flats; Epi Ready
5628 1 $290.00 undoped SI GaAs:- [310] ±0.5° 2" 400 P/E ITME n-type 5.5E7 1.9E7 5,800 <1,400 SEMI Flats(two); with Minor Scratches
11452 8 $230.00 SI GaAs:Cr [100] 4" 625 P/E CMK 1.58E8-1.93E8   6,081-6,130 <8.04E4 EJ Flats; Epi Ready
7336 1 $320.00 SI GaAs:Cr [100] 2" 400 P/P ITME 1.05E8-1.15E8 (1.3-1.4)E8 2,246-4,334 <4E4 Cr doped, EJ Flats, Epi Ready
A0676 2 $165.00 n-type GaAs:Si [100] 3" 370 P/E CMK 0.00152-0.00339 (7.06-23.3)E17 1,760-2,610   US Flats; Epi Ready
10089 40 $78.00 n-type GaAs:Si [100-0.8°] ±0.5° 2" 470 P/E CMK 0.00115-0.00651 (1.45-4.86)E17 >1,000 <8,000 VGF; EJ Flats; Epi Ready, Sealed cassettes of 25 wafers
A1706 10 $142.00 n-type GaAs:Si [100] 2" 350 P/P CMK 0.00384-0.00500 (4.76-8.24)E17 1,974-2,654 <8,500 VGF; 2 Flats; Epi Ready
8019 1 $390.00 n-type GaAs:Si [100] 2" 2,250 ±50 C/C CMK 1.06E-3-1.8E-3 (3.2-4.24)E18 1,083-1,384 <4E4 EJ Flats
11706 9 $142.00 n-type GaAs:Si [100] 50±0.3mm 300 P/P CMK   (2.24-6.48)E17   <9,000 VGF; 2 Flats; Epi Ready
8204 2 $141.00 n-type GaAs:Si [111B] 2" 350 P/E CMK   (2.27-2.31)E17     2 Flats; Epi Ready
A302 41 $109.00 p-type GaAs:Zn [100] ±0.25° 2" 450 ±10 P/E CMK   (8-30)E18   <8,000 VGF; EJ Flats; Epi Ready
B0538 13 $140.00 p-type GaAs:Zn [100] 2" 300 P/E CMK 0.00413-0.01010 (8.48-55.5)E18 37-73 <21,850 1 Flat; Epi Ready
11384 7 $160.00 p-type GaAs:Zn [110] ±0.5° 2" 500 P/E CMK 0.0111-0.0130 (2.97-5.43)E18 103-161 <4.84E4 P Flat @ <011>; S Flat @ <100>, Epi Ready
11471 6 $290.00 p-type GaAs:Zn [111B] ±0.25° 4" 420 P/E CMK 0.00462-0.00803 (4.7-15.2)E18 89-166 <3.19E4 VGF; EJ Flats; Epi Ready, in single wafer cassettes, With lasermark on back
1797 2 $480.00 undoped GaAs:- [100] 4" 625 P/P ITME aro 2 wks n-type 0.083 2.1E16 3,657 <5E4 SEMI US Flats; in single-wafer cst
2295A 2 $190.00 undoped SI GaAs:- [100-4° towards[111A]] ±0.5° 51.3mm 380 P/E ITME aro 2 wks n-type 7.4E7 1.7E7 5,000 <8E4 SEMI Flats; Epi Ready
O399 4 $140.00 undoped SI GaAs:- [100-8° towards[110]] ±0.5° 2" 490 ±40 P/E CMK Aro 7-9 wks n-type 8.65E8   435   EJ Flats; Epi Ready
A1497 9 $140.00 undoped SI GaAs:- [100-2° towards[110]] 2" 500 P/E CMK Aro 7-9 wks n-type 4.38E8   5,398 <67,000 P Flat @ <0-1-1>; SF @ <0,-11>; Epi Ready; 76 more wafers available
O1083 5 $138.40 undoped SI GaAs:- [100] 2" 350 P/E CMK aro 2-3 wks n-type 2.19E8   6,375 <84,000 50.8mmØ, EJ Flats; Epi Ready; 13 more wafers available
O1416 35 $139.00 undoped SI GaAs:- [100] 2" 350 P/E CMK Aro 7-9 wks n-type >1E7       1 Flat; Epi Ready
2237 5 $850.00 undoped SI GaAs:- [100] 2" 6,700 ±50 P/P ITME aro 4-6 wks n-type 1.1E8 1.1E7 5,000 <1E5 NO Flats; Epi Ready
2328C 2 $725.00 undoped SI GaAs:- [100] 2" 5,000 P/E ITME aro 2 wks n-type 4E7 2.7E7 5,700 <5.3E4 SEMI Flats; Epi Ready
2308B 2 $295.00 undoped SI GaAs:- [310] ±0.5° 2" 400 P/E ITME aro 2 wks n-type 5.5E7 1.9E7 5,800 <1,400 EJ Flats; Epi Ready; minor edge chips
3F543 1 $195.00 undoped SI GaAs:- [111B] 4" 625 P/E CMK Aro 7-9 wks n-type 3.71E8-5.31E8   5,011-5,416   EJ Flats; Epi Ready; 2 more wafers available
A817B 5 $165.00 undoped SI GaAs:- [111B] 3" 630 P/E CMK Aro 7-9 wks n-type 1.8E8-6.5E8   4,631-6,643 <1E5 P Flat @ <11-2>; SF 45° CW from PF; Epi Ready; 29 more wafers available
O1706 4 $140.00 undoped SI GaAs:- [111B] 2" 350 P/E CMK Aro 7-9 wks n-type 1.92E8-1.46E9   1,417-2,116 <68,000 P Flat @ <2-11>; SF 45° CW from PF; Epi Ready; 5 more wafers available
O1375 9 $140.00 undoped SI GaAs:- [111A] 2" 450 P/E CMK Aro 7-9 wks n-type 1.22E9   2,154 <65,000 P Flat @ <11-2>; S Flat 45° CCW from PF, Epi Ready; 34 more wafers available
A819 2 $165.00 n-type GaAs:Si [100] 3" 370 P/E CMK Aro 7-9 wks 0.00406 (3.84-5.1)E17 3,011-3,368 <94,000 EJ Flats; Epi Ready
A819B 1 $166.00 n-type GaAs:Si [100] 3" 400 P/P CMK Aro 7-9 wks 0.00406 (3.84-5.1)E17 3,011-3,368 <94,000 EJ Flats; Epi Ready
HN17 5 $120.00 n-type GaAs:Si [100-0.8° towards[110]] ±0.5° 2" 470 P/E aro 2-3 wks <1 (0.05-1)E18     VGF; EJ Flats; Epi Ready
1F055 16 $138.00 n-type GaAs:Si [100] 2" 620 E/E CMK Aro 7-9 wks 0.00349-0.00851 (2.32-8.18)E17 2,189-3,131 <25,000 US Flats, Can be polished
3F051 3 $140.00 n-type GaAs:Si [100-2° towards[011]] 2" 350 P/E CMK Aro 7-9 wks 0.00221-0.00282 (9.1-13.6)E17 2,074-2,438 <2,500 P Flat @<0-1-1>, SF @ <0-11>; Epi Ready; 19 more wafers available
T3686 6 $194.00 n-type GaAs:Te [100] 4" 750 P/P CMK Aro 7-9 wks 8.09E3 (3.6-18.3)E16 4,218   EJ Flats; Epi Ready; 1 more wafer available
3F214 3 $195.00 p-type GaAs:Zn [100] 4" 450 P/E CMK Aro 7-9 wks 0.00294-0.00703 (3.1-4.8)E19 51-81 <14,000 EJ Flats; Epi Ready

GaP - Gallium Phosphide
Note: Surface - P = Polished, E = Etched, C = AsCut, G = Ground, Ox = Oxide (on that surface)
Add to
Cart
Item Qty in
Stock
Price
$/wafer
Material Orient. Diam. Thck
(μm)
Surf. Source Resistivity
Ωcm
Nc
a/cm3
Mobil
cm2/Vs
EPD
/cm2
Comment
11569 4 $580.00 undoped GaP:- [100] 2" 350 P/E ITME n-type >8.2E7 <4.5E18 170 <3E4 2 Flats; Epi Ready, Two US Flats
11389 3 $580.00 undoped GaP:- [100] 2" 400 P/P ITME n-type 1.2-4.0 (1-2)E16 155-162 <4E4 2 Flats; Epi Ready
10400 1 $680.00 undoped GaP:- [111B] ±0.5° 2" 400 P/E ITME n-type 1.35E13 3.1E3 160 <6E4 EJ Flats; Epi Ready
A0400 1 $680.00 undoped GaP:- [111B] ±0.5° 2" 400 P/P ITME n-type 1.35E13 3.1E3 160 <6E4 EJ Flats; Epi Ready
10778 1 $680.00 undoped GaP:- [111B] ±0.5° 2" 400 P/E ITME n-type 0.09-0.22 (2-4.6)E16 145-155 <8E4 EJ Flats; Epi Ready
10673 3 $700.00 n-type GaP:S [100-10° towards[110]] ±1° 2" 302 P/E ITME 0.11-0.15 (4.75-5.35)E17 105-115 <5E4 EJ Flats; Epi Ready
8152 1 $500.00 n-type GaP:S [100-10° towards[110]] ±1° 2" 302 P/E ITME 0.16 4.79E17 112 <5E4 EJ Flats; Epi Ready
10501 3 $620.00 n-type GaP:S [100] 2" 400 P/E ITME 0.039-0.064 (9-18)E17 88-108 <6E4 EJ Flats; Epi Ready
11015 5 $670.00 n-type GaP:S [100] 2" 500 P/P ITME 5.9E-2 1.1E18 100 <4.5E4 US Flats; Epi Ready, Note: lamella present (<2mm)
10890 2 $570.00 n-type GaP:S [100] 2" 350 P/P ITME 0.0370-0.0420 (1.7-1.9)E18 87-90 <6E4 US Flats; Epi Ready
A0890 1 $570.00 n-type GaP:S [100] 2" 460 P/E ITME 0.0370 1.9E18 90 <6E4 US Flats; Epi Ready
6940 710 $40.00 n-type GaP:S [100-2.0° towards[101]] ±1.0° 48.25mm 280 ±15 P/E ELMA 0.050-0.125 (4-14)E17 70-130   2 Flats, PF @ <0,1,-1>±1°, SF 135° CW from PF; Sold in sealed cassettes of 25 wafers<
H940 5 $200.00 n-type GaP:S [100-2° towards[110]] ±0.3° 48.25mm 300 ±50 P/E ElmaT 0.050-0.125 (4-14)E17 70-130   2 Flats, PF @ <0,1,-1>±1°, SF 135° CW from PF; Sold in sealed cassettes of 25 wafers
10543 1 $880.00 n-type GaP:S [111A] ±0.5° 2" 420 P/E MS 4.7E-2 1.9E18 85 <8E4 1 Flat; Epi Ready
10992 5 $550.00 p-type GaP:Zn [311] ±0.5° 2" 350 P/E ITME 0.85 1.15E18 64 <2.2E4 2 Flats; Epi Ready
99B 15 $445.00 p-type GaP:Cd [100] 2" 400 C/C ITME aro 5 wks 2.2 2.5E16 120 <8E4 P/E or P/P, SEMI/EJ Flats, to be polished, MOQ=5 wafers
331 6 $540.00 undoped GaP:- [100] 2" 400 P/E ITME aro 3-6 wks n-type 1E7-1E14 <4E7 >160 <6E4 2 Flats, TEST grade - crystal fault (3-5)mm long, near & parallel to SFlat
358 10 $470.00 undoped GaP:- [100] 2" 400 P/E ITME aro 3-6 wks n-type >1E12 <1E4 <50 <6E4 2 Flats, TEST grade - crystal fault at edge, (15-25)mm, single-wafer cst
373 13 $470.00 undoped GaP:- [100] 2" 400 P/E ITME aro 3-6 wks n-type 1.8E13 2.33E3 149 <6E4 2 Flats, TEST grade - 29mm lamelle parallel to SF,, single-wafer cst
354 2 $616.00 undoped GaP:- [111B] ±0.5° 2" 400 P/E ITME aro 2 wks n-type 1.35E13 3.1E3 160 <5.9E4 EJ Flats; TEST grade - sub-surface bubbles <20μmØ, single wafer cst
349 7 $1,375.00 undoped GaP:- [111B] ±0.5° 2" 3,425 C/C ITME aro 2 wks n-type 3.2E3-1.2E8 (3.5-120000)E8 150-156 <5E4 2 Flats; can be supplied polished aro (3-6) weeks
296D 1 $616.00 n-type GaP:S [100]off 10° twd. 110 2" 300 P/E ITME Aro 1-2 wks 0.115 (4.8-5.7)E17 115 <5E4 EJ Flats, P/E
268 2 $445.00 n-type GaP:S [100-10° towards[110]] ±1° 2" 302 P/E ITME aro 2 wks 0.11 5.3E17 105 <8.9E4 EJ Flats; Epi Ready
78B 1 $620.00 n-type GaP:S [100-6° towards[111]] ±1° 2" 400 P/E ITME aro 2 wks 0.058 9.9E17 107 <5.3E4 SEMI Flats; Epi Ready
244 3 $445.00 n-type GaP:S [100-10° towards[011]] ±1° 2" 350 ±10 P/E ITME aro 2 wks 0.051 1.4E18 88 <6.6E4 SEMI Flats; Epi Ready
129B 5 $616.00 n-type GaP:S [100] 2" 350 P/P ITME aro 4-6 wks 0.064 (1.7-1.9)E18 87-90 <6E4 SEMI/EJ Flats, P/E or P/P, to be polished, MOQ=5 wafers
009 1 $445.00 n-type GaP:S [111B] ±0.5° 2" 275 P/E ITME aro 2 wks 0.136 4.37E17 105 <5E4 NO Flats; Epi Ready
012B 1 $580.00 n-type GaP:S [111B] ±0.5° 2" 400 P/E ITME aro 2 wks 0.075 8.6E17 96 <7.8E4 EJ Flats (PF@[-1,1,0], SF@[1,1,-2]); Epi Ready
148A 1 $544.00 n-type GaP:S [111A] ±0.5° 2" 350 P/E ITME aro 2 wks 0.042 2E18 76 <2E5 SEMI Flats; TEST grade, not fully polished
148B 1 $568.00 n-type GaP:S [111B] 2" 400 P/P ITME aro 2 wks 0.041 2E18 72 <2E5 EJ Flats; TEST grade - Small scratch

GaSb - Gallium Antimonide
Note: Surface - P = Polished, E = Etched, C = AsCut, G = Ground, Ox = Oxide (on that surface)
Add to
Cart
Item Qty in
Stock
Price
$/wafer
Material Orient. Diam. Thck
(μm)
Surf. Source Resistivity
Ωcm
Nc
a/cm3
Mobil
cm2/Vs
EPD
/cm2
Comment
11653 5 $540.00 undoped GaSb:- [100] 2" 450 P/E ITME due 4/15 p-type 0.063-0.072 (1.25-1.55)E17 638-694 <3,000 US Flats; Epi Ready
A1705 5 $520.00 p-type GaSb:Zn [100] 2" 425 P/E ITME due 3/23 0.0070-0.0078 (2.4-2.8)E18 320-334 <3,000 US Flats; Epi Ready
F179 1 $420.00 p-type GaSb:Zn [100] 2" 450 P/E ITME 0.0079 2.6E18 310 <3,000 EJ Flats (66-98)mm; Measured @ 300°K; Epi Ready
G179 1 $420.00 p-type GaSb:Zn [100] 2" 450 P/E ITME 0.0077 2.6E18 310 <3,000 EJ Flats; Epi Ready
A179 1 $420.00 p-type GaSb:Zn [100] 2" 450 P/E ITME 0.0039-0.0040 5.6E18 278 <2,000 US Flats; Measured @ 300°K; Epi Ready
GaSb28 10 $440.00 undoped GaSb:- [100] 2" 450 C/C ITME Aro 1-2 wks p-type 0.073 1.2E17 694 <3,000 US Flats(two); Measured at 300°K; Price for polished wafers
GaSb24D 1 $480.00 p-type GaSb:Zn [100] 2" 610 C/C ITME aro 1-2 wks 0.0079 2.6E18 310 <3,000 EJ Flats (66-98)mm; Price for Polished wafers
GaSb24C 10 $475.00 p-type GaSb:Zn [100-6.0° towards[111]] ±0.5° 2" 550 C/C ITME aro 1-2 wks 0.0074 2.6E18 320 <3,000 EJ Flats (42-52)mm; Price for Polished wafers
GaSb23C 8 $475.00 p-type GaSb:Zn [100-6° towards[111]] ±0.5° 2" 380 P/E ITME aro 3 weeks 0.00415 5.43E18 275 <3,000 US Flats; Measured @ 300°K; Epi Ready
GaSb23 4 $430.00 p-type GaSb:Zn [100] 2" 450 C/C ITME aro 1-2 wks 0.0043 5.5E18 265 <2,000 US Flats; Price for polished wafers

InAs - Indium Arsenide
Note: Surface - P = Polished, E = Etched, C = AsCut, G = Ground, Ox = Oxide (on that surface)
Add to
Cart
Item Qty in
Stock
Price
$/wafer
Material Orient. Diam. Thck
(μm)
Surf. Source Resistivity
Ωcm
Nc
a/cm3
Mobil
cm2/Vs
EPD
/cm2
Comment
10495 14 $350.00 p-type InAs:Zn [100] 2" 500 P/E Xiamen   (1-3)E18 100-130 <10,000 VGF; 2 Flats; Epi Ready
130 2 $720.00 undoped InAs:- [100] 3" 500 P/E ITME aro 5-8 wks n-type 0.0096-0.0130 (2.1-3)E16 21,540-23,200 <3,500 EJ Flats; Epi Ready

InP - Indium Phosphide
Note: Surface - P = Polished, E = Etched, C = AsCut, G = Ground, Ox = Oxide (on that surface)
Add to
Cart
Item Qty in
Stock
Price
$/wafer
Material Orient. Diam. Thck
(μm)
Surf. Source Resistivity
Ωcm
Nc
a/cm3
Mobil
cm2/Vs
EPD
/cm2
Comment
G950 4 $400.00 SI InP:Fe [100] 6" 680 ±3 P/P Showa 0.9E7-1.6E7   2,800-3,000 <1.8E4 VGF; SEMI Notch; Epi Ready
11595 5 $580.00 SI InP:Fe [100] ±0.2° 3" 625 P/E InPACT >1E7     <3E4 EJ Flats; Epi Ready, TTV<10μm, Warp<15μm, individual cst
10619 1 $250.00 SI InP:Fe [100] 2" 350 P/P InPACT >1E7     <10,000 EJ Flats; Epi Ready
D745 17 $120.00 SI InP:Fe cube [100] 8×4 3,500 P/P Comsec 2.5E7 1.3E8 2,330 6.8E4 All sides polished, 8.0×4.0mm is (001), 4.0×3.5mm is (110), 8.0×3.5mm is (1,-1,0)
F745 3 $400.00 undoped InP:- Seed crystal [100] 16x16 75,000   Comsec n-type       Seed crystal sides are [011] & {01-1]; 92g
G745 7 $180.00 undoped InP:-Seed crystal [100] 8x8 mm 75,000   Comsec n-type       Seed crystal sides are [0,1,1] & [0,1,-1]; 23g
A1651 3 $390.00 n-type InP:S [100] 2" 400 P/E ITME due 4/08 0.0010-0.0011 (2-6)E18 1,419-1,470 <2E4 EJ Flats; Epi Ready
B745 7 $280.00 n-type InP:S [100] 2" 2,000 ±50 P/E Comsec 0.0011 3.6E18 1,530 <1.1E4 SEMI Flats; Epi Ready
11651 3 $370.00 n-type InP:S [100] 2" 400 P/E ITME due 4/08 0.0010-0.0011 (3.8-4.3)E18 1,417-1,490 <2E4 EJ Flats; Edge Chips, Epi Ready, Individual cst
11777 25 $300.00 p-type InP:Zn [100-2° towards[110]] ±0.1° 50.0mm 350 P/E InPACT   >4.1E18   <500 TEST grade - surface or crystal defects over <5% of wafer area), EJ Flats, Epi Ready, Individual csts
W206 1 $200.00 InP Ingot Poly 2" 15mm   Comsecore         Ingot piece 15mm×16mm×60mm, $200 for whole piece
L206 0.55 $800.00 InP:(S+Zn) Ingot [100] 2"     Comsecore #P_047 ~0.028 ~4.5E18 ~45 0.1E4 Two small Ingot ends
J206 1.35 $1,500.00 n-type InP:S Ingot [100] 2" 133,400   Comsecore #625 (1.3-0.7)E-3 (3.2-7.7)E18 1,500 - 1,200 2.0E4 3 ingots 133.4mm total
2206 1.2 $1,500.00 n-type InP:S Ingot [100] 2" 41, 22, 54   Comsecore #623 (1.40-0.71)E-3 (3.0-7.5)E18 1,460 - 1,190 1.0E4 3 ingots 117mm total
N206 1.41 $1,500.00 n-type InP:S Ingot [100] 2" 114,300   Comsecore #P_93 (1.0-0.9)E-3 (4.3-9.8)E18 1,490 - 1,200 4.0E4 Ingot 114mm long
M206 1.4 $1,500.00 n-type InP:S Ingot [100] 2" 95,000   Comsecore #P_088 (2.70-0.97)E-3 (1.2-4.3)E18 2,130 - 1,500 4.0E4 Ingot 95mm long
S206 0.45 $800.00 n-type InP:S Ingot Poly 2" 20,000   Comsecore #P_110         Ingot 20mm long
R206 3 $800.00 n-type InP:S Ingot [100] 2" 102   Comsecore #P_109 (1.80-0.77)E-3 (2.1-6.3)E18 1,730 - 1,300 4.0E4 Ingot 102mm long
K206 0.66 $1,500.00 n-type InP:S Ingot [100] 2" 63,500   Comsecore #507 (1.3-0.5)E-3 (4.5-16.5)E18 1,230 - 813 1.5E4 Ingot 63.5mm long
Q206 1.48 $1,500.00 n-type InP:S Ingot [100] 2" 158   Comsecore #525 (1.30-0.55)E-3 (3.1-11.0)E18 1,560 - 1,100 1.0E4 Ingot 159mm long
P040 1 $325.00 n-type InP:S [100] 2" 350 P/E ITME aro 12 wks 8.89E-4 4.96E18 1,418 <2.9E4 EJ Flats; Epi Ready
636 4 $335.00 n-type InP:S [115] 2" 400 P/E ITME aro 12 wks 1.08E-3 4.07E18 1,416 <3.7E4 NO Flats, Epi Ready

EL-CAT Inc. 80 Railroad Ave., Ridgefield Park, NJ 07660 USA;  tel: 201-444-7343;  fax: 201-444-7933;  e-mail: el-cat@el-cat.com
Web Site Developed By: Mark Zakrzewski
mark@el-cat.com